-9-80000000000000000
S19/S21 Universal / Noctua Vent (NF-F12 iPPC 3000 RPM) / Xilinx / AMLogic - $150.00
- S19/S21 Universal / Noctua Vent (NF-F12 iPPC 3000 RPM) / Xilinx / AMLogic - $150.00
- S19/S21 Universal / Noctua Vent (NF-F12 iPPC 3000 RPM) / BeagleBone - $150.00
- S19/S21 Universal / 25-30mm Fans Standard Vent / Xilinx / AMLogic - $150.00
- S19/S21 Universal / 25-30mm Fans Standard Vent / BeagleBone - $150.00
- S19/S21 Universal / 38mm Fans Open Vent / Xilinx / AMLogic - $150.00
- S19/S21 Universal / 38mm Fans Open Vent / BeagleBone - $150.00
- S19J Pro Aluminum (BHB42631) / Noctua Vent (NF-F12 iPPC 3000 RPM) / Xilinx / AMLogic - $150.00
- S19J Pro Aluminum (BHB42631) / Noctua Vent (NF-F12 iPPC 3000 RPM) / BeagleBone - $150.00
- S19J Pro Aluminum (BHB42631) / 25-30mm Fans Standard Vent / Xilinx / AMLogic - $150.00
- S19J Pro Aluminum (BHB42631) / 25-30mm Fans Standard Vent / BeagleBone - $150.00
- S19J Pro Aluminum (BHB42631) / 38mm Fans Open Vent / Xilinx / AMLogic - $150.00
- S19J Pro Aluminum (BHB42631) / 38mm Fans Open Vent / BeagleBone - $150.00
- S19 Pro (NBP1901) / Noctua Vent (NF-F12 iPPC 3000 RPM) / Xilinx / AMLogic - $150.00
- S19 Pro (NBP1901) / Noctua Vent (NF-F12 iPPC 3000 RPM) / BeagleBone - $150.00
- S19 Pro (NBP1901) / 25-30mm Fans Standard Vent / Xilinx / AMLogic - $150.00
- S19 Pro (NBP1901) / 25-30mm Fans Standard Vent / BeagleBone - $150.00
- S19 Pro (NBP1901) / 38mm Fans Open Vent / Xilinx / AMLogic - $150.00
- S19 Pro (NBP1901) / 38mm Fans Open Vent / BeagleBone - $150.00
PRODUCT DETAILS
Just the Enclosure!
Printed with Carbon Fiber reinforced PETG makes for a durable enclosure with a nice matte finish and texture.
I do print these on demand, so a lead time of ~1-3 weeks can apply.
Included
- Top Section
- Mid-section
- Mid-section Intake Guard
- Bottom section
- Bottom section I/O Plate
- (4x) Rubber feet
- (4x) 1/4''-20 X 4-1/2'' Bolts
Additional supplies required to assemble
-
(1x) Hasboard
- *S19 88-chip is too long and not compatible
-
(1x) Control Board
- Xilinx, AMLogic, BeagleBone I/O plates available
-
(1x) Loki Kit
- ensure correct kit for the control board and firmware you plan on using
- (1x) APW3++ PSU
- (1x) 6 pin PCI connector and 6" wire with ring terminals
- Control board power
- Part of Kit: https://structur3.io/products/loki-rig-cable-kit-6awg
- (2x) 21" 6 AWG Pure Copper cable
- 3/16 inch (#10)(M5) ring terminals recommended
- Part of Kit: https://structur3.io/products/loki-rig-cable-kit-6awg
- (23x) M5x10 Computer PC Case Fan Screws
- Used to secure fans to lid and I/O plate to bottom section and PSU
-
(4x) M2x6mm screws
- secures control board in place, but not required